IN625 Nickel Base Alloy Powder Inconel 625 Paura
Whakaahuatanga Hua
Huarui teitei pāmahana nickel-based alloy IN625 paura ko te paura papaitia, rawa e tika ana mo te hangarau hanga SLM, tae atu ki te EOS Selective Laser Whakarewa Taputapu (EOSINT M Series), Concept Laser Whakarewa Taputapu, Renishaw Laser Whakarewa Taputapu, American 3D Systems Laser Whakarewa Taputapu, me nga whare rangahau whare me nga whare wananga.
Na roto i te tohatoha o te rahi o te matūriki, ka taea hoki te wehewehe ki roto i te paura whakarewa werohanga, te paura whakakikorua taiaho, te rehu paura, te paura perehi isostatic wera me etahi atu.
Whakatakotoranga
| Te Hanga Matū(%) o Inconel 625 Paura | ||||||
| Cr | Co | Al | Mo | Mn | Ti | Nb |
| 20-23 | ≤1.0 | ≤0.4 | 8.0-10 | ≤0.5 | ≤0.4 | 3.15-4.15 |
| Fe | C | Si | P | S | O | Ni |
| ≤0.5 | ≤0.1 | ≤0.5 | ≤0.015 | ≤0.15 | ≤0.02 | Bal |
| Kiato Putanga: 4.50g/cm3 | Tae: hina | Hanga: porowhita | ||||
| Rahi Matūriki | 15-53micron;45-105micron;45-150micron | |||||
| Inconel 625 Nga Taonga Paura | ||||||
| Awhe Rahi | 0~25um | 0~45um | 15~45um | 45~105um | 75~180um | |
| Morphology | Porowhita | Porowhita | Porowhita | Porowhita | Porowhita | |
| Te Tohatoha Rahi Matūriki | D10: 6um | D10: 9um | D10: 14um | D10: 53um | D10: 78um | |
| D50:16um | D50: 28um | D50: 35um | D50: 69um | D50: 120um | ||
| D90: 23um | D90: 39um | D90: 45um | D90: 95um | D90: 165um | ||
| Te kaha rere | N/A | ≤30S | ≤28S | ≤16S | ≤18S | |
| Te Totoi Te ahua | 4.2g/cm3 | 4.5g/cm3 | 4.4g/cm3 | 4.5g/cm3 | 4.4g/cm3 | |
| Ihirangi hāora (wt %) | O: 0.06~0.018wt% , Paerewa ASTM: ≤0.02 wt% | |||||
| Ta 3D Gas Atomized Inconel 625 Paura me te utu pai | ||||||
| (he iti te hāora , te teitei o te sphericity me te rere pai) | ||||||
Taupānga
1. HVOF
2. Te paninga plasma
3. Tā 3D / hanga tāpiritanga
4. paura fehokotaki'anga
5. whakarewa werohanga whakarewa
6. wera isostatic
Hua e Pa ana
Ka tukuna ano e matou te paura Inconel 718, te paura NiCr, te paura NiAl, te paura Ni20-Ni65, nau mai ki te uiui!
